Microsoft Azure AZ-101 Certification Information

AZ-101 exam
AZ-101 exam study guide

Certification Name: Microsoft Azure AZ-101: Microsoft Azure Integration and Security
Duration of Exam: 180 Minutes
Pre-requisite: None

Microsoft Azure AZ-101 FAQs

1.Are there any prerequisites for Azure AZ-101 Exam certification?

No, there are no prerequisites for the Azure AZ-101 exam.

2.How many free questions available in the free test?

We are offering a free test with 10 questions.

3.Do you have any preparation instructions for this certification exam?

Read articles on certification preparation tips on the blog.

4.Does passing the az-101 certification exam give me control over Azure integration and security?

You assign to a client location to work, and no matter what authentication you get, you cannot deploy the server in any way.

5.Is the exam difficult?

It’s very difficult.

6.What does it take to implement Azure Administrator certification?

To obtain role-based authentication, you must pass the following exams:
az-100 exam: Microsoft Azure Infrastructure and deployment
az-101 exam: Microsoft Azure Integration and security

7.What would I get if I only passed one of the two exams required for certification?

An achievement badge.

How to Prepare for Microsoft Azure Exam AZ-101?

AZ-101 exam is the second step to becoming a Qualified Microsoft Certified Azure Administrator.

Basic Prerequisites Needed

Candidates for this exam should be proficient in using PowerShell, command-line interfaces, Azure az-101 study guide portals, ARM templates, operating systems, virtualization, cloud infrastructure, storage structures, and networks.

Topics:Az-101 Exam

  • Evaluate and perform server migration to Azure (15-20%)
  • Implement and manage application services (20-25%)
  • Implement advanced virtual networking (30-35%)
  • Secure identities (25-30%)

Examination mode

  1. The az-101 exam will have about 40-60 questions. Some questions can be answered in one word, while others may require long explanatory answers. That’s why the exam failed – some participants won’t even try to read the exam clearly. Suppose the questions they get need to answer exactly three points, they may try to explain with more points, or give fewer points in the answer part. This answer will be flagged as incorrect at the time of the assessment – only due to the negligence of the participants.
  2. There are a total of 180 minutes to take the entire exam. It is reserved for 30 minutes for explanations, comments, etc. All you have to do is effectively use the remaining 150 minutes to answer the question. There are some problems you can’t skip, and some questions score more than others. In addition, there are different types of issues, such as active screens, generated lists, and more. If you are unsure of the answer to your question, you can mark it as a later answer.

Got a specific methodology:AZ-101 Exam Preparation

Microsoft Resource You’ll find a lot of resources for az-101 exam preparation, including exam scheduling options, preparation tips, exam outlines, pricing charts, and more. Whenever any of Microsoft’s exam structures change, it will first appear here.
BooksExam Ref AZ-101 Microsoft Azure Integration and Security
ForumsIf you want a serious AZ-101 exam preparation strategy, make sure you don’t lose sight of the importance of forums or forums.You can discuss your questions here with other people who have AZ-101 exams.
Training & Practice Tests Take a Microsoft Official Practice Test for exam az-101 dumps.
AZ-101T01: Migrate Servers to Azure
AZ-101T02: Implement and Manage Application Services
AZ-101T03: Implement Advanced Virtual Networking
AZ-101T04: Secure Identities

Try Now: AZ-101 Practice Tests

Microsoft Azure AZ-101 Practice Tests

To help you prepare for the AZ-101 exam, and in the first attempt to pass the exam, here we start the az-101 Practice test. These hands-on tests will help you check your readiness level, work in weak areas, and become confident enough to pass the AZ-101 certification exam.

10 AZ-101 Questions and Answers [LATEST]

2019 Latest geekcert AZ-101 PDF and VCE dumps Download

QUESTION 1
You have an Azure subscription.You enable multi-factor authentication for all users.Some users report that the email applications on their mobile device cannot co browser and from Microsoft Outlook 2016 on their computer.You need to ensure that the users can use the email applications on their mobile device.What should you instruct the users to do?
The users can access Exchange Online by using a web

A. Enable self-service password reset.
B. Create an app password.
C. Reset the Azure Active Directory (Azure AD) password.
D. Reinstall the Microsoft Authenticator app.
Correct Answer: A

QUESTION 2
You have an Azure subscription named Subscription1 and two Azure Active Directory (Azure AD) tenants named Tenant1 and Tenant2.Subscnption1 is associated to Tenant1 Multi-factor authentication (MFA) is enabled for all the users in Tenant1.You need to enable MFA for the users in Tenant2. The solution must maintain MFA forTenant1.What should you do first?

A. Transfer the administration of Subscription1 to a global administrator of Tenants.
B. Configure the MFA Server setting in Tenant1.
C. Create and link a subscription to Tenant2.
D. Change the directory for Subscription1.
Correct Answer: C

QUESTION 3
A web developer creates a web application that you plan to deploy as an Azure web app.Users must enter credentials to access the web application.
You create a new web app named WebAppl1 and deploy the web application to WebApp1. You need to disable anonymous access to WebApp1.What should you configure?

A. Advanced Tools
B. Authentication/ Authorization
C. Access control (IAM)
D. Deployment credentials
Correct Answer: B

QUESTION 4
You have an azure subscription that contain a virtual named VNet1. VNet1. contains four subnets named Gatesway,perimeter, NVA, and production.The NVA contain two network virtual appliance (NVAs) that will network traffic inspection between the perimeter subnet and the production subnet.You need o implement an Azure load balancer for the NVAs. The solution must meet the following requirements:The NVAs must run in an active-active configuration that uses automatic failover.The NVA must load balance traffic to two services on the Production subnet. The services have different IP addresses Which three actions should you perform? Each correct answer presents parts of the solution.NOTE: Each correct selection is worth one point.

A. Add two load balancing rules that have HA Ports enabled and Floating IP disabled.
B. Deploy a standard load balancer.
C. Add a frontend IP configuration, two backend pools, and a health prob.
D. Add a frontend IP configuration, a backend pool, and a health probe.
E. Add two load balancing rules that have HA Ports and Floating IP enabled.
F. Deploy a basic load balancer.
Correct Answer: BCE

QUESTION 5
You have an Azure Service Bus. You need to implement a Service Bus queue that guarantees first in first-out (FIFO) delivery of messages.What should you do?

A. Set the Lock Duration setting to 10 seconds.
B. Enable duplicate detection.
C. Set the Max Size setting of the queue to 5 GB.
D. Enable partitioning.
E. Enable sessions.
Correct Answer: E

QUESTION 6
You are the global administrator for an Azure Active Directory (Azure AZ-101 VCE dumps AD) tenant named adatum.com. From the Azure Active Directory blade, you assign the Conditional Access Administrator role to a user You need to ensure that Admin1 has just-in-time access as a conditional access administrator.What should you do next?

A. Enable Azure AD Multi-Factor Authentication (MFA).
B. Set Admin1 as Eligible for the Privileged Role Administrator role.
C. Admin1 as Eligible for the Conditional Access Administrator role.
D. Enable Azure AD Identity Protection.
Correct Answer: A

QUESTION 7
You have an Azure virtual network named VNet1 that contains a subnet named Subnet1. Subnet1 contains three Azure AZ-101 exam questions virtual machines. Each virtual machine has a public IP address.The virtual machines host several applications that are accessible over port 443 to user on the Internet.
Your on-premises network has a site-to-site VPN connection to VNet1. You discover that the virtual machines can be accessed by using the Remote Desktop Protocol (RDP) from the Internet and from the on-premises network. You need to prevent az-101 dumps pdf access to the virtual machines from the Internet, unless the RDP connection is established from the on-premises network. The solution must ensure that all the applications can still be accesses by the Internet users.What should you do?

A. Modify the address space of the local network gateway.
B. Remove the public IP addresses from the virtual machines.
C. Modify the address space of Subnet1.
D. Create a deny rule in a network security group (NSG) that is linked to Subnet1.
Correct Answer: D

QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription named Subscription1.Adatum contains a group named Developers. Subscription1 contains a resource group named Dev. You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.Solution: On Subscription1, you assign the DevTest Labs User role to the Developers group.Does this meet the goal?

A.Yes
B. No
Correct Answer: B

QUESTION 9
You discover that VM3 does NOT meet the technical requirements.You need to verify whether the issue relates to the NSGs.What should you use?

A. Diagram in VNet1
B. the security recommendations in Azure Advisor
C. Diagnostic settings in Azure Monitor
D. Diagnose and solve problems in Traffic Manager Profiles
E. IP flow verify in Azure Network Watcher
Correct Answer: E

QUESTION 10
You have an Azure subscription named Subscnption1 that contains an Azure virtual machine named VM1.VM1 is in a resource group named RG1.
VM1 runs services that will be used to deploy resources to RG1.You need to ensure that a service running on VM1 can manage the resources in RG1 by using the identity of VM1.What should you do fit?

A. From the Azure portal modify the Access control (1AM) settings of VM1.
B. From the Azure portal, modify the Policies settings of RG1.
C. From the Azure portal, modify the value of the Managed Service Identity option for VM1.
D. From the Azure portal, modify the Access control (IAM) settings of RG1.
Correct Answer: C